Registration methods

There are several methods for registering publications in Pure. They are all described below.

All methods start by clicking the "Add new" button.

or the plus-sign to the right of "Research outputs" in the left-hand menu.


Regardless of which method you use, you always need to check if the publication already exists in Pure. When registering research output, please pay attention to warnings, notifying you of possible duplicates.

Quick submit

What is Quick submit

Quick submit is used to register publications in Pure without completing the fields normally required for a publication to be created in the system.

If you lack the routine in the use of Pure, Quick submit is an option to have your publications registered anyway. An editor will finish the registration information after you submit the publication.

If you need your publications to be visible on your personal homepage right away, you should not use Quick submit. Instead, create the publication in Pure directly by using one of the other methods (see below).

Pure snapshot. Profile overview and list of publications

When not to use Quick Submit

Publications that enter Pure through Quick Submit are not visible in Pure and on your personal homepage before they have been registered by an editor. You can only see (not open or edit) pending publications in a status overview on your profile page (backend) in Pure.

You can find Quick Submit as the first menu item under Publications. Click "Quick Submit". This opens a new window with a form.

Open the document file for the publication you want to register. Fill out the fields as described. See the example below as well.


Copy the publication title from the document file and paste it into the "Title" field.


Add supplementary notes in the note field if the document file does not provide the full information about co-authors, publication, conference, book, expected publication date and other information an editor need in order to correctly register the publication.


You can upload the document itself by dragging over the file and drop it into the field "Documents" You can also click "browse" and navigate to the location where the file is saved.

After you have transferred the document, you can click "Show" to make sure it is the correct document file.

You can remove the file by clicking the button with the minu-sign to the right of the "Show" button if you have tranferred the wrong file.


Import from online source

There are several advantages to importing publication information from an online source:

  • You save time by not having to type in all information
  • You avoid mistyping and spelling titles and names wrong
  • DOI (digital object identifier) are ofte registered automatically and you can access the publication, using that link and verify all information.
  • You can set up name searched and be automatically notified of new publication to import and register.

One disadvantage is that you risk creating duplicate records of persons and organizations because the publication contains slight variations of names that Pure cannot match exactly in the import process. Therefore, it is important to scrutinize the suggestions Pure makes, and carefully select what you choose to import.

You can import from these online sources.

Each source has its strengths and weaknesses. None of them are 100% perfect. You always need to check the imported information and compare to what is in the publication, and what master data exists in pure.

Start by selecting the source you want to import from.

Search for the publication you want to import by writing the author's name, title (or part of), Aarhus University or other limiting search terms.

Depending on your search you will se one or more publications in the list of results. When you have found your import candidate, click import to start the import process.

You will get a warning if the publication has already been imported from the same source.

If a publication with a similar title already exists in Pure you will also get a warning.

Both types of warnings contain a link (the title) to the existing publication. Click on the link and check whether it in fact is a duplicate, and whether it has been registered correctly. Here it is important to check the research output type as different types can have identical title. For example if an article was presented as a poster.

The import window is used to select which authors and organizations to connect to the publication.

The organizational found in the publication may differ from the organizational unit where the author is currently employed. The organizational unit that you add in Pure should match what is in the publication.

Importvinduet bruges til at vælge hvilke forfattere og organisationer, der skal tilknyttes publikationen.

It is important that you scrutinize the matches that Pure gives you. In the example there is an email address embedded in the organization name. As a consequence, Pure cannot find the correct match although Department of Bioscience - Zoophysiology does exist in Pure.

Instead of importing erroneous names and variants thereof, you need to search for organizational units that are already in Pure and use these.

Use "Add organization" to look for the correct organization. Pure will automatically suggest AU organizational units from the "Enhedsregistret".

If it becomes too complicated to find and add the correct organizations you can just delete suggestion from the import window so that poor suggestions are not imported. Click the minus-symbol to the right to remove what you do not want to import. After you have imported the publication you can open the normal publication editor and edit the affilliated organizations.

After the import, you need to review the entire record and check whether all publication information is sufficient and correct. Pay special attention to the following:

  • all authors appear with correct names
  • authors appear in the same order as in the publication
  • a person employed at AU appear as an internal person - author or editor
  • the organizational affilliations match what's in the publication

If the publication has been published you set the workflow status (at the very bottom) to "For validation" before you save the record. The publication will then be validated by the AU Pure team. If the publication has not been published you change the status to "Entry in progress".

Submission by template

Submission by template is a manuel process where you need to populate the field in the template with information about the publication yourself. That increases the risk of mistyping and leaving out relevant information. The advantage is that you are less likely to create duplicate records in Pure.

If a publication has many affilliated authors and organizations, a lot of time can be saved by importing the publication instead. Therefore, check whether the publication can be imported from an online source (see below).

If import is not an option, you have to create the publication by completing the template manually.

"Create from template" can be found by clicking the plus-sign next to "Research output" in the" or clicking the green "add content" button.

When you select "Create from template" you can select between several types of publication templates, corresponding to types of publications that can be registred in Pure. If you select one of the categories, the subcaterogies are shown. It is only possible to create publication in a subcategory.

Når du vælger "Opret fra skabelon" får du vist de forskellige typer publikationer, der kan registreres i Pure. Hvis du vælger en af kategorierne, får du vist en eller flere underkategorier. Du kan kun oprette publikationer i underkategorierne.

Select the subcategory that fits the publication that you want to register by clicking "Select". That opens the editor for the corresponding template. Complete the template.

(copy 3)

Each category has a description to help you select the correct one. You may also click ""Submission guide" at the top to read the descriptions. You can also find the publication type definitions here. When  you have chosen the correct template you are ready to register the publication.

If you experience that the information in the publication do not fit the fields in the template, it might be that the template does not match the publication type.


Oplever du, at publikationens oplysningerne og felterne i skabelonen ikke passer helt sammen, kan det være, at den skabelon du har valgt ikke matcher publikationstypen.

If you have chosen the wrong template you can change it by clicking "Change template" in the top right-hand corner. Please note, that templates do not all have the same fields, and registered data may be lost when changing templates.

Import from file (ORCID, RIS; BibTex, PXA)

If you have registered your research out in Pure when you were employed at another institution, or you have them registered in ORCID, you can import them into Pure if we have the right file type.

We can use the following file types in Pure: BibTex, RIS, and PXA. These file types contain most of the information about your research output and can be injected into Pure.

Publications from ORCID etc. (BibTex and RIS-file)

BibTex and RIS files contain title, authors, publishing house, ISBN and other publication metadata. You are able to import data from BibTex and RIS files into Pure yourself.

If you would like to transfer publications from your ORCID profile to Pure, you need to create a BibTex file with your publication information from the ORCID website.

Many publishers allow you to export your data in a BibTex file format from their homepage or reference library.

From the menu select "Import from file" and select the file format you want to work with.

You may copy the file content into the text field, or upload the file by clicking "browse" and navigate to the file location, or simply drag the file from the location and drop it in the window. Complete either process by clicking the "Import" button.

After the file has been transferred, you will see the list of publications to be imported with authors, journals, etc. showing below each title.

If a publication is flagged as a possible duplicate you need to investigate whether that is the case. Remove duplicate publications that you do not wish to import.

Each publication needs to be imported separately. after you click "Import" you have to consider which authors and organizational units you want to include in the import. See the section on this page about importing from an online source. The mechanism is the same. If there is no need to review the information first, just click Import and review (at the bottom of the window). That will take you to the publication editor and you can modify the publication data as needed from there.

You can generate BibTex, RIS and other files from AU Pure if you need export your publications. You can either export the entire list of research output or you can filter the list first. In the example the list is filtered by using a simple search for "Goblet cell".

Down at the bottom of the window you can see which file formats you have available. Depending on how many publications you have it will take a short moment or a bit longer to generate the file.

Publications from employment at other institutions (PXA-file)

PXA (Pure XML Archive) is a format that is unique to Pure. In addition to the metadata that is included in file formats such as BibTex and RIS, the PXA file also includes associated files and their Open Access status. This information is transferred from one Pure system to another when using a PXA-file.

Only Pure administrators are to generate and import PXA-files from and to AU Pure. If you have publications registered in another institutions Pure system, you need to request a PXA-file from their Pure administrator and have them send it to Then, the AU Pure Support will handle the import to the AU Pure system.

Likewise, you need to ask a Pure administrator at your new job, to write to request a PXA-file with your registrations in the AU Pure system if you want these records transferred to Pure at your new institution.

The PXA may not work, if the transfer takes place between two different versions of Pure.

Automatic publication search

You have the option to get notified when publications that your are affiliated with can be imported from online sources such as Scopus; PubMed and Web of Science.

You find Automatic search in the left-hand menu.

For each source there is a On/Off button. Set the buttom to ”On” for each source that you want to activate automatic search for.

When you have turn on search for a source, you can add name variants that you want to include in the search. Pure will automatically suggest a couple of variants that you can accept by clicking “Add suggested names” in the yellow box.

Automatic search in Scopus requires a unique Scopus Author ID. See the section “Add Scopus Author ID” to learn how to create or add this ID.

If you want to add other or more name variants, click “Add name” above the yellow box

Write in a variant of your first and last name. Click “Add name” to add the name to the variant list. For Web of Science it is only possible to search by initials and last name, not your full name.

Repeat if you want to add more variants.

Remember to click "Save" for the entire profile at the bottom of the page.

To see how your list works, click ”Preview candidates”. This gives you a window with a list of publications that match the current list name variant. Publication that have already been imported in to Pure, will not be on the list.

If the list contains too many publications that are not yours, it could be helpful to edit or remove names from the list, or correct your Scopus author ID. Use the links in the header above the candidate list.

When you have activated search for one or more sources, you get a notification in your task list on the right-hand side of your profile overview in Pure.

By checking the box at the top you can also choose to get an email notification when import candidates have been found.